what kind of aluminium alloy is used into blind

why do aluminium ions move to the canthode
就是为什么Al电子会移动到负极?

英语翻译
We are making Aluminium kraft paper reinforcement material for joing to the glass wool for Insulation matter.So far we did by ready product but now we bought coating lamination machine we would like to buy the weaving section ( TRI -WAY ) by PE ,FIBER GLASS
ON LINE

Silver diamond-dots-embossed aluminium surface, Silver aluminium round frame,
请问中文是什么意思

英语翻译
1 For aluminium alloy structures,the insulation is to be such that the temperature of the
structural core does not rise more than 200 above the ambient temperature at any time during
the applicable fire exposure.
2 For composite structures,the insulation is to be such that the temperature of the
laminate does not rise more than the minimum temperature of deflection under load of the
resin at any time during the applecable fire exposure .The temperature of deflection under
load is to be determined in accordance with a recognised international standard.
3 Insulation need only be applied on the side that is exposed to the greatest fire
risk,ieinside the engine room,a division between two such spaces should however be insulated
on both sides unless it is a steel division.
4 Special attention is to be given to the fixing of fire door frames in bulkheads
constructed of materials other than steel.Measures are to be taken to ersure that the
temperature of the fixings when exposed to fire does not exceed the temperature at which the
bulkhead itself looses sterngth.
2.1 A:Machinery spaces of category "A",are to be enclosed by "A-13"Class divisions.
B:For Short Range Yachts,machinery spaces of category "A",are to be enclosed by "B-15"
Class divisions.
2.2 Openings in 'A'and'B' Class divisions are to be provided with permanently attached
means of closing that are to be at least as effective for resisting fires as the divisions
inwhich they are fitted.Generally,windows should not be fitted in machinery space
boundaries.
2.3 Where 'A'Class divisions are penetrated for the passage of electric
cables,pipes,trunks,ducts,etc,or for girders,beams or other structural members,arrangements
are to be made to ensure that the fire resistance is not impaired.
2.4 Where 'B'Class divisions are penetrated for the passage of electric
cables,pipes,trunks,ducts,etc,or for the fitting of ventilation terminals,lighting fixtures
and similar devices,arrangements are to be made to ensure that the fire resistance is not
impaired.
2.5 Where the structure or 'A'Class divisions are required to be insulated,it is to be
ensured that the heat from a fire is not transmitted through the intersections and terminal
points of the divisions or penetrations to uninsulated boundaries.Where the insulation
installed does not achieve this,arrangements are to be made to prevent this heat
transmission by insulating the horizontal and vertical boundaries or penetrations for a
distance of 450mm(this may be reduced to 380mm on steel divisions only).

麻烦翻成中文.
machined aluminium castings.
There are 16 parts,some nearly 1.7m long,some 12kg in weight and they need pressure testing to 33,63 or 99 bar.
There are very fine tolerances,and very high quality standards.
They want to find a company who works with Aluminium regulary,already does sand castings and fine machining,and can test for integrity in the castings.
Other information I have been given is that the metal is LM25 and then after casting and before machining it,is heat treated to make it into LM25TF.I have the heat treatment process if needed.
Also it only needs pressure testing to 33 bar.

aluminium pipe in mill finish,machine for electroplating,parts for burner是什么产品?
parts for hydraulic press machine