The face to face dimensions and tolerances, body flange dime

英语翻译
the hole cutout and drilling attachment hole dimensions are here for the 10" woofer in the 10tl
mounting and shipping information
blot circle diameter 249/9.8-8*6.5 mm/inch
overall diameter 265/10 mm/inch
baffie cutout diameter 234/9.2 mm/inch
it will need two front panels so the first one will have a cut-out of 234mm.this panel can be plywood.
the second outer panel will have a cut-out of 266mm.
the bolt hole arrangement will be ,249mm and there are 8.
the hole cutout and drilling attachment hole dimensions are here for the 180mm horn in the 10tl
this particular portion of the front plate i will want to go over after the cad box is drawn.i just think it's easier to do one thing at a time.but here is the cut-out anyway.remember there will be changes to the outer front plate for this one.the cut-out is fine and correct.
physical attributes
height
180mm/7.1in
width
180mm/7.1in
baffle cut-outØ1***/6.1in
mounting detail
2 m6 holes on 76mm/3in pc
here is the mounting and cut-out dimensions for the s8sx2,there are woofers on both front and back.they oppose each other.the inner panel can be plywood with a cut-out of 7.25".the second outer panel must be 15mm or better solid surface with a cut-out of 8.25".
the mounting holes are 7.75 diameter and there are 8 of them.
a:outer diameterx05 x058 1/4"
b:hole diameterx057 1/4"
f:mounting diameterx057 3/4" (8)
g:rabbett depthx055/32"

在"I am a prisoner of time,a witness to all dimensions,all worlds.Throughout all exists the great will...It is the key to escaping my external prison." 中,Great

求高人翻译.小弟不解这句话中"UL"的意思.All UL dimensions on drawing must be maintained.
All UL dimensions on drawing must be maintained. 这个是关于图纸的一句话.大意是“必须包含图纸中的尺寸要求”,苦于不知UL何意,在此求助!跪等!

Does anyone know Hofstede’s study of cultural dimensions?
If so,do u think his study is important to help solving the barriers between different nations?Please give reasons.
Thank u^^

Assignment has more non-singleton rhs dimensions than non-singleton subscripts
Ly = 51; Lx = 501; t = ones(1,8)*alpha/(2*pi);IIn = ones(8,Lx,Ly);
IEq (i,:,:) = IEq(i,:,:)+ reshape(t*reshape(IIn,8,Lx*Ly),1,Lx,Ly);
Error in ==> radiation at 66
IEq (i,:,:) = IEq(i,:,:)+ reshape(t.*reshape(IIn,8,lx*ly),1,lx,ly); % equilibrinm PDFs

英语翻译
For both:S2= 2-4 minutes.Flange version (dimensions of shaft and flange are free to choose) Quadratic torque due to centrifugal pump charateristic.
Equipped with thermal cut-out and solidstate relais.
谁能帮我翻译下啊

这个电容参数表,如何看
1.DIMENSIONS 这个是什么表?
2.我需要对它放电,用多大的电容?放电多久?
3.charge & discharge 这个表简述一下.
4.shelf life 这个表简述一下.

我在看一本英国木材书说The Table is a single piece with dimensions of 8-9/16” x 9-1/16”.
这是什么意思?大神指教.

英语 请解释语法句子结构
Where dimensions are not specified by company Engineering the following shall apply

英语翻译
1.The latest model of this car,whose exterior dimensions remain unchanged,gives much more passenger room.
2.A man that can safely be depended on is not easily to be found.
3.Books that sell well are usually good books.
4.Everyone that heard her sad story was moved to tears.
5.He dried the last bottle that was left.

英语翻译
1,ALL DIMENSIONS ARE SHOWN AS NOMINAL MILLIMETERS AND ARE FOR REFERENCE ONLY.
2,MATERIAL:1.5mm DIA.AND LARGER:HARDENED ALLOY STEEL PER DIN6325,HRC60 + - 2
1.0mm DIA.18-8 STAINLESS STEEL DIN 7
3,FINISH AND TOLERANCE:PRECISION DROUND TO m6 OVERSIZE TOLERANCE
4,ALL DIMENSIONS ARE METRIC PER DIN 6325 or DIN 7 STANDARD.
请懂紧固件/钢铁的
10 - 离问题结束还有 14 天 2 小时
1,ALL DIMENSIONS ARE SHOWN AS NOMINAL MILLIMETERS AND ARE FOR REFERENCE ONLY.
2,MATERIAL:1.5mm DIA.AND LARGER:HARDENED ALLOY STEEL PER DIN6325,HRC60 + - 2
1.0mm DIA.18-8 STAINLESS STEEL DIN 7
3,FINISH AND TOLERANCE:PRECISION GROUND TO m6 OVERSIZE TOLERANCE
4,ALL DIMENSIONS ARE METRIC PER DIN 6325 or DIN 7 STANDARD.

英语翻译
Please use the dimensions on the file I sent you on Friday ( I will attach it to this email as well).The 4Lbs weight,hickory handle and olive drab semi-gloss paint will stay the same.The changes will be to the AX head and to the handle measurements if needed.Please make the head and handle match the attached sheet.

英语翻译
Notes:
Dimensions show critical to function-all others per electronic model
Color:per standard supplied by humanscale
Typical draft:2.5°unless noted
Surface requirements:
Sinks,voids,or porosity is unacceptable
Remove all oil,dirt,or other surface contamination
Ejector pins:flush to recessed ,15 of any surface
Flash to be trimmed flush to ,13 with casting surface
Parting line mismatch:,13 max
以上,

英语翻译
4.unspecified draft is 1.0°.
5.all dimensions are to virtual corners
6.all face surfaces with Ra=0.75±0.15um to be machined with diamond knife as agreed by sample

Part to be welded inside of tube.Dimensions are in inches secondary are in millimeters

1.Find the dimensions of the largest rectangle that can be inscribed in the semicircle y=√4-x平方.
2.a closed cylindrical can is to have a capacity of 16pi cm3.what are the radius of the base and the height of the cylinder for the total surface area to be a minumum.
3.a company manufactures items at 2 dollars per item and sells then for x dollars per item.if the number sold is 800/x2 per month,find the value of x for which the company could expect to maximie its monthly profit.
4.A traveller employs a man to drive him from A to B for an hourly payment of P dollars.running costs of the car,which are also paid by the traveller,are Kv*3 dollars per hour,where vkm h*-1 is the speed,and k is a constant.find the uniform speed that will minimize the total cost of the journey.
5.if y=ax+b/x and if y=13 when x=1 and x=20 when x=2,find the values of a and b and the value of x for which y is a minimum.
感激不尽!完成保证再加分!
p.s 不是求翻译.

dimensions十字绣都是英文我的确比较郁闷呵呵 有三个英文短句我不是很懂得
如果没有绣过dimensions 十字绣的朋友就算了因为单从英文翻译的角度看是翻译不出来的呵呵
green yarn569not used for stitching
Dk.olive green12296 combined colors and details
Gold metallic0G0LG combined colors only

A box has dimensions that are linear factors of (x^3 -7x^2+14x-8) cubic centimetres.what dimensions give a volume of 12 cm^3
x³ - 7x² + 14x - 8 = (x - 4)(x - 2)(x - 1)
这一步..能给我的具体过程么?

一道英文数学题(微积分)
The dimensions of a rectangle are changing in such a way that the area remains 24 in^2.At what rate is the perimeter changing at the instant when one side is 6 in,long and is increasing at the rate of 0.3 inch per minute?

英语翻译
unless otherwise specified:dimensions are in inches
tolerances:angular ±25°,2 pl ±.201,3 PL ±.2005,4 PL ±2.0005.
SYMM&CONC:1/2 FEATURE TOL.
FAB FINISH:125 MICROINCHES.
BRK/FIL SHARP COR .01 MAX

英语翻译
find the dimensions of the rectangle with greatest area assuming the rectangle is positioned as in the figure

英语翻译
Unless otherwise specified:
Dimensions are in inches
tolerances:
angular:mach bend
two place decimal
three place decimal
interpret geometric
tolerancing per:

what are the dimensions of a square with a perimeter of 12 in?

Index exceeds matrix dimensions.
>> disp('');
disp(' ');
n=input('请输入所要测试的随机数长度：')
k=0;b=0;c=0;d=0;e=0;f=0;g=0;h=0;l=0;j=0;
for t=1:100
a=rand(1,n)
sum=0
for i=1:n
sum=sum+2*b(i)-1;
end
Sobs=abs(sum)/sqrt(n)
p=Sobs/sqrt(2)
p_value=erfc(p)
if(0

Gift Box You are wrapping a gift box that has the dimensions shown in the figure.You want to tie a
ribbon around the box as shown,so
that whenever the ribbon intersects an edge
of the box,its distance to the nearest corner is
1/3 the length of the edge of the box.Not
counting he extra length needed for tying the
ribbon,how long must the ribbon be?

triangleABC has the following dimensions:
AC=10,AB=8,and angleACB=20degrees
a) Calculate the 2 possible values for angleCAB
b)sketch and label the 2 possible shapes for triangleABC
I want process and picture!
thank u

英语翻译
Five moral dimensions of the information age：
information rights and obligations
property rights and obligations
accountability and control
system quality
quality of life

MATLAB问题?

TXT共720行,老是提示Index exceeds matrix dimensions.
Error in ==> Untitled3 at 4
xi=m(i,1);

matlab怎么将读进来的xls数据经过处理在写进另一个xls并导出；
m=xlsread('C:UsersljDesktop负荷率.xlsx');
b=[];
for i=1:1440
if 0

Matrix dimensions must agree.
x1=data(:,2);
x2=data(:,3);
x3=data(:,4);
x4=data(:,5);
x5=data(:,6);
x6=data(:,7);
x7=data(:,8);
x8=data(:,9);
x9=data(:,10);
y=data(:,11);
input_train=[x1,x2,x3,x4,x5,x6,x7,x8,x9];
output_train=[y];
minp=min(input_train);
maxp=max(input_train);
mint=min(output_train);
maxt=max(output_train);
pn=2*(input_train-minp)/(maxp-minp)-1;
tn=2*(output_train-mint)/(maxt-mint)-1;
结果报错
Error using ==> minus
Matrix dimensions must agree.
Error in ==> rbf1 at 17
pn=2*(input_train-minp)/(maxp-minp);
我觉得矩阵的维度是一致的呀.可以相减

Dimensions:D:2.5cm,H：1.9cm中,“D”表示什么?
Dimensions:L:8cm,W:1.2cm,T:0.4cm.还有这个“T”表示什么?
请告知其意义与全拼,

又来向您请教了
of all the dimensions of environmental governance undergoing rapid change,most attention has been devoted to the growing urgency of the threats that need to be addressed.as argued by united nations secretary-general kofi annan,these now warrant consideration jointly with the other great global issues of the 21st century：“*** from want,*** from fear,and the *** of future generations to sustain their lives on this planet.” the first two of these issues reflect the longstanding concerns for poverty alleviation and physical security that framed the un charter.the last,as the secretary-general notes,was "not clearly identified in the charter because in 1945,our founders could scarcely imagine that it would ever be threatened.” today,that threat is increasingly clear,and our most enlightened political leaders have begun to redefine the priority tasks of governance to include sustainability.
【a】 second rapidly changing dimension of environmental governance is the scale over which it needs to operate.the trends toward “globalization“ that have entrained so many aspects of our lives in the increasingly interconnected world of the 21st century have affected the environment as well.in response,more international environmental treaties were adopted and more international environmental institutions were founded in the last quarter of the 20th century than in the preceding hundred years.a few of these have worked relatively well.in general,however,our capacity for effective implementation lags far behind the recognized need.
finally,the actors and institutions involved in environmental governance are changing.【the political transformation of ‘‘a closed public policy process into a more open and participatory one”】 for southeast asia,is under way for much of the rest of the world as well,shifting power away from central ***s toward local communities and civil society organizations.simultaneously,the globalization trends noted above have pushed in the other direction,moving power toward multinational corporations and international institutions.
1、我不理解为什么在 a second rapidly changing dimension of environmental governance 中为什么会用不定冠词 a ,而不用定冠词 the
2、如果把 the political transformation 【of】 ‘‘a closed public policy process into a more open and participatory one” 改为 the political transformation 【from】 ‘‘a closed public policy process into a more open and participatory one” ,哪种表达更符合语言慌里慌张?
请您指教,
最后的话打错了,应为：哪种表达更符合语言习惯?

英语翻译
机械加工类的
1.Dimensions apply at point of intersection
2.Optional gate witness to be flush to .015 max & to be within2.660/2.630 dim
3.Conn rod 06EA400563-S1 same as std 06EA400563 except crankshaft bore to be .010 undersized as shown.Conn rod asy to be uesd with crankshaft 06EA500524-S1
4.Item #3 capscrew & item # washer used for machining purposes only-refer to base cprsr asy.for final asy hardware.
yahaodeai 不会翻译就不要乱翻,软件我都有

英语翻译
THE FOLLOWING TOLERANCES APPLY TO MACHINING DIMENSIONS UNLESS
OTHERWISE SPECIFIED.ALL DIMENSIONS ARE FINAL AND INCLUDE ANY
PLATING OR FINISH.ALL DIMENSIONS ARE INCHES OR [mm].TOLERANCES:
ANSI STD Y14.5-1982 0.010 ON ALL FRACTIONS AND 1 OR 2 PLACE
DECIMALS 0.005 ON ALL 3 PLACE DECIMALS.这段话是在一个机械零件图上对尺寸公差的要求,请问具体要怎么翻译,

数学练习题.GWD
The figure above shows the dimensions of a semicircular cross section of a one-way tunnel.The single traffic lane is 12 feet wide and is equidistant from the sides of the tunnel.If vehicles must clear the top of the tunnel by at least ½ foot when they are inside the traffic lane,what should be the limit on the height of vehicles that are allowed to use the tunnel?
A.x055½ ft
B.x057½ ft
C.x058 ½ ft
D.x059½ ft
E.x0510 ft

看看这个句子的意思和语法
The five dimensions are very broad,because each brings into one large category many traits that have unique connotations but a common theme

英语翻译
In fact,an inquiry into the dimensions of competition would almost certainly be
useful.Competition driven by new products and features is especially important.It
may be useful to identify customer views about the extent of competition.In
addition,such research may help to quantify the relative importance of various
performance parameters,which may assist in developing a performance-based
index akin to the one suggested in Hartman et al.(1993).Finally,by quantifying
customer needs and customer response to product innovation by various suppliers,
the information gained may help to determine whether the innovative and other
‘competitive’activity that has occurred(or is being alleged)constrains behavior
sufficiently to support a specific market definition.In the example of overcurrent
protection devices,because behavior by suppliers is directed mainly toward
performance parameters that are very important to customers(i.e.,that the
customers value highly),the finding of broad markets can likely be sustained.
Another indicator of a broad competitive market in high technology markets
would be substantial shifts in share over time—e.g.,at least 4–5 years.Where
this has occurred and,importantly,is(or has been)expected to occur,this should
be viewed as definitive evidence of competitive forces and a broad market.In such
circumstances,monotonic gains by one product or technology are not necessarily
an indication that such a product or technology is insulated from competitive
forces.If this gain is sustained only by out-innovating others in the market,
competition may be broad and powerful.
For example,in 1992 Raychem viewed the threat from Smart Power as
potentially powerful and likely to emerge in the next 3–4 years(sooner in some
cases).

英语翻译
Non-machined features and datum dimensions for positioning features shall be measured relative to jig spots or alternatively face-to-face dimensions shall apply.

谁能帮忙翻译一下NOTES：1.SEE SHEET 1 FOR BASE DIMENSIONS AND MATERIAL INFORMATION 2.HARDFACING WELD（3）PLACES USING COBALT BASE ALLOY IN ACCORDANCE WITH AWS A533 ECoCr-A(STELLITE #6,STOODY #6,WALLEX #6 OR EQUIVALENT).WELD SHALL FILL THE RELIEF AND BE OF UNIFORM WIDTH.DO NOT STOP WELD IN THE RELIEF.WELD DEPOSIT SHALL BE WELL FUSED TO THE BASE METAL AND FREE OF VISABLE POROSITY IN CONTACT AREA.