torque applied but cap spins谁能准确的翻译一下,

英语中介词for的用法
还有“The computation of torque for ideal and practical currents is developed,”这句的for祈祷什么作用呢?这句怎么翻译呢?

拉链英语
the zipper pull needs to take lead content & torque test
请问 lead content & torque test是什么测试?

公英制扭矩换算问题求解!
一、英文原文标题：Proof Torque Min. lbf-in.
二、数值如下：
1. 1,450
2. 2,700
3. 4,500
4. 7,650
5. 15,000
6. 20,000
7. 25,000
请问如何转换成为N.m?转换后的数值各是多少?

英语翻译
原文如下：The host computer gives
position,speed,and torque command to the servo drive
through serial bus.

求汽车英语专业翻译 !懂的来.
the steering torque applied by the drive is measured via a torsion rod with a torque sensor and
in addition the speed is measured via a speed sensor

英语翻译
The prevailing torque element may be located within a "collar" which is in addition to the normal thickness.

一道英文的物理题
Which of the following is a torque expression?
A. ? = ma
B. ? = m?v
C. ? = vsinA?
D. ? = FsinA*d
翻译一下,还有答案是哪个?

英语翻译
Abstract—Improvements on the torque with low currents using rotor with spiral sheets are analyzed.Several rotors and stators have been built combining different constructive and mechanical characteristics of the related elements:inertias,constructive materials,geometrical shapes of the sheets and geometrical disposition of the sheets.These different types of motors have been simulated using computer aided tools and then tested in the laboratory.Finally,four stators (1000,1500,1500-type A,and 3000 rpm) having the same constructive parameters,have been simulated and tested with the following rotors types:solid rotor,solid rotor with diamagnetic rings,drag cup,and simple and double squirrel cage rotor; these results have been compared to those obtained with the seven variants of spiral sheet rotor presented in this paper.
x05Index Terms—Electric machines,Special machine,Spiral sheet rotor,Three-Phase asynchronous motor.
x05Technical Tracks—T2:Electrical machines and drives.
x05I.INTRODUCTION
x05The rotors of conventional asynchronous motors are formed by magnetic sheets packed above the shaft of the machine.The rotating magnetic field created by the stator,induces currents parallel to the shaft and so upright to the rotor sheets [1].Those currents cannot flow between the sheets if they are electrically isolated,being necessary the intervention of conventional squirrel cage rings to close the electric circuit and thus the rotor currents can circulate.
x05In table I the basic mechanical characteristics of some rotors tested are presented [3].These rotors have the same dimensions and they are assembled to stators of 1000 rpm,1500 rpm and 3000 rpm,having the latter the same constructive parameters.
x05II.MOTOR WITH SPIRAL SHEET ROTOR
x05Forming a rotor with spiral shape sheets [8],distributed in a radial disposition around the shaft,it is possible to generate a magnetic field in the rotor periphery,inducing peripheral emf,and currents along the same sheets,that are only active in their periphery.

Direct Torque and Indirect Flux Control of Brushless DC Motor Salih Baris Ozturk,Member,IEEE,and

关于力矩torque的物理题
A string is wrapped around a uniform disk of mass M = 1.5 kg and radius R = 0.11 m.(Recall that the moment of inertia of a uniform disk is (1/2)MR2.) Attached to the disk are four low-mass rods of radius b = 0.19 m,each with a small mass m = 0.6 kg at the end.The device is initially at rest on a nearly frictionless surface.Then you pull the string with a constant force F = 23 N.At the instant when the center of the disk has moved a distance d = 0.049 m,a length w = 0.024 m of string has unwound off the disk.
(a) At this instant,what is the speed of the center of the apparatus?
(b) At this instant,what is the angular speed of the apparatus?
(c) You keep pulling with constant force 23 N for an additional 0.042 s.Now what is the angular speed of the apparatus?
绳子缠绕在一个标准圆盘上,圆盘质量为1.5kg,半径为0.11m（标准圆盘惯性为（1/2MR^2））.四个质量很小,半径为0.19m的小杆连接在圆盘上,每个小杆的末尾有一个小砝码,质量为0.6kg.这个装置最初静止在一个不记摩擦力的平面上.然后你用一个恒定的力,F=23N,拉动它.当圆盘中心移动0.049m,绳子展开量为0.024m时：
（a）这个仪器中心速度是多少
（b）这个仪器的角速度是多少
（c）在此后的0.042s中,你仍然保持用23N的力拉动它.现在它的角速度是多少?

力矩是矢量还是标量
在百度百科里有人说“力矩(torque)：力(F)和力臂(L)的叉乘(M).物理学上指使物体转动的力乘以到转轴的距离[1].
即：M=L×F.其中L是从转动轴到着力点的矢量,F是矢量力；力矩也是矢量”
为什么L（矢量）*F（矢量）=矢量
我记得矢量相乘等于标量啊?
难道我记错啦?
指教 我知道矢量相乘不一定是标量啦！

在物理学里,作用力使物体绕着转动轴或支点转动的趋向,称为力矩(torque).转动力矩又称为转矩.难道是除了转动力矩之外还有其他力矩吗?

英语翻译
The solenoid valve recheck limit torque is54-102 N-m (40-75 ftlbs) when measured with a socket.
主要是不清楚 socket 这个词的意思
请不要用翻译机

为什么陀螺会摇晃?
就是说陀螺旋转的时候还会同时摇晃
书上解释是因为重力给了陀螺的边一个扭转力(torque,扭矩?) 然后导致角动量变化然后导致陀螺摇晃
可我不明白既然每个边上都有扭矩那么不是应该平衡么?另外就算不平衡那扭矩是怎么影响角动量的呢?角动量的变化又是如何使陀螺摇晃的呢?
还有个小问题就是mv1r1-mv2r2=(FLt)SIN(A)
根据这个公式是不是可以说陀螺的线速度是在减少的 但是减少的速率也是减少的?

this assembly is to be torqued to 50-75 ft./ Lbs at assembly 请求中文翻译,急!急!

请问这句英文的具体意思：22-Stage adjustable clutch for precise torque setting