insulation和isolation有什么区别

英语翻译
· What is the insulation between the coil ,Live & out?
· Why is there a difference in the Breaking Capacity?
· Insulation to be tested up to 20 KVA ( Between coil and 3 nodes ) – Safety device
· What are the specification on isolation between coil to pole?
· Do you have any factory change control?
· Do you have any Revision control?

英语翻译
Turn the power of the insulation resistance meter ON and measure the insulation resistance.The duration of the applied voltage must be the period during which 100 兆欧 or more is confirmed (or 20 兆欧 if the unit is equipped with a built-in arrester)

英语翻译
是船舶电气方面的
Insulation meter，Socket lampstand，Holder of fuse End plate忘了加逗号了

英语翻译
insulation crimp
conductor crimp
Insulation crimp wings contact at least 180 degrees of the insulation surface.

英语翻译
isofelt is our line of thermo-acoustic insulation which has a wide range of use.
completely fire resistant,biosoluble,waterproof,containing no chemical agents that could generate fumes in the case of a fire,and can also be used in applications where high-temperature resistance is required(please see technical data sheet).
The true innovative factor of the isofelt line is in the workmanship of the fibers.it begins with continuous threads that have been cut and mechanically separated and then layered.the perfect felt cohesion is further guaranteed through a needle punching process that creates a strong and homogeneous mechanical bond between the fibers without using chemical agents.
its extreme cutting ease allows the felt to take on complex forms and its mechanical strength is very good.together these qualities make all isofelt line productis ideal for a wide range of applications.from industrial and vehicle insulation to air and liquid filtration.
in case of necessity,isofelt line products and be coupled with other materials-aluminium film,foam rubber,plastic,etc-for the perfect insulation of pipes and other heat sources.

英语翻译
Ceiling Insulation
Lady Kitchener woodburner with wetback & cooktop
North facing,sunny
Replumbed,except for 2nd toilet/handbasin
Bathroom/laundry & 2nd toilet need gibbing finished,then painting.2nd toilet/handbasin needs to be plumbed in.
Dining room ready to be gibstopped

英语翻译
1 For aluminium alloy structures,the insulation is to be such that the temperature of the
structural core does not rise more than 200 above the ambient temperature at any time during
the applicable fire exposure.
2 For composite structures,the insulation is to be such that the temperature of the
laminate does not rise more than the minimum temperature of deflection under load of the
resin at any time during the applecable fire exposure .The temperature of deflection under
load is to be determined in accordance with a recognised international standard.
3 Insulation need only be applied on the side that is exposed to the greatest fire
risk,ieinside the engine room,a division between two such spaces should however be insulated
on both sides unless it is a steel division.
4 Special attention is to be given to the fixing of fire door frames in bulkheads
constructed of materials other than steel.Measures are to be taken to ersure that the
temperature of the fixings when exposed to fire does not exceed the temperature at which the
bulkhead itself looses sterngth.
2.1 A:Machinery spaces of category "A",are to be enclosed by "A-13"Class divisions.
B:For Short Range Yachts,machinery spaces of category "A",are to be enclosed by "B-15"
Class divisions.
2.2 Openings in 'A'and'B' Class divisions are to be provided with permanently attached
means of closing that are to be at least as effective for resisting fires as the divisions
inwhich they are fitted.Generally,windows should not be fitted in machinery space
boundaries.
2.3 Where 'A'Class divisions are penetrated for the passage of electric
cables,pipes,trunks,ducts,etc,or for girders,beams or other structural members,arrangements
are to be made to ensure that the fire resistance is not impaired.
2.4 Where 'B'Class divisions are penetrated for the passage of electric
cables,pipes,trunks,ducts,etc,or for the fitting of ventilation terminals,lighting fixtures
and similar devices,arrangements are to be made to ensure that the fire resistance is not
impaired.
2.5 Where the structure or 'A'Class divisions are required to be insulated,it is to be
ensured that the heat from a fire is not transmitted through the intersections and terminal
points of the divisions or penetrations to uninsulated boundaries.Where the insulation
installed does not achieve this,arrangements are to be made to prevent this heat
transmission by insulating the horizontal and vertical boundaries or penetrations for a
distance of 450mm(this may be reduced to 380mm on steel divisions only).

英语翻译
applications
insulation of pipes,containers and air conducts(inc.bends,fittings,flanges etc.) for refrigerationair-conditoning installations to save energry and prevent the formation of condensation.